Construction site safety during COVID-19

Construction site safety during COVID-19.

As the government confirmed that many construction-related projects are essential services—including critical maintenance, building safety inspections and emergency repairs, construction businesses are permitted to continue operations, as long as they implement a variety of site procedures to protect their employees and minimise the risk of spreading COVID-19.

If your construction business fails to comply with these procedures, the government could require you to shut down. Aston Lark Insurance Brokers have put together the following guidance to ensure your business is meeting site standards, keeping employees healthy and promoting continued operations during these unprecedented times.

 

Site Access Points

Regarding controlling your construction site’s access points, be sure to implement the following measures:

  • Reduce site traffic. Prohibit entry from any non-essential visitors. In addition, utilise staggered start and finish times for your workers to limit site congestion and physical contact. Further, restrict the number of people in attendance at any site inductions, and consider holding them outdoors whenever feasible.
  • Practice social distancing. Consistently monitor site access points to ensure social distancing guidelines are being met. This might require changing the number of available access points on-site. When employees are waiting to enter the worksite, encourage them to keep 2-3m of distance between one another as much as possible. If any work procedure requires the use of a vehicle,such as a forklift, on-site, have the driver remain inside the vehicle, if the load will allow it, to reduce physical contact between staff.
  • Prioritise sanitation. Require employees to wash their hands before entering and after leaving the worksite, as well as before and after handling all goods, materials and equipment. Routinely clean any common contact surfaces, for example scanners, turnstiles, screens, telephones and desks. Lastly, be sure to temporarily remove or disable any site entry systems that require skin contact, such as fingerprint scanners.

 

Canteens and Eating Arrangements

Although construction sites are usually required to provide employees with a means of heating food and making hot drinks, the government confirmed that these exceptional circumstances call for such equipment to be removed from the worksite where it is not possible to keep the equipment sanitised at all times.

In addition, employees are not permitted to leave the worksite to eat during this time. They should be required to bring pre-prepared meals and reusable drinking bottles from home. Apart from these changes, make sure you promote the following canteen and eating arrangements at the worksite:

  • Keep it clean. Only allow employees to eat in designated areas. Provide hand cleaning facilities or hand sanitiser stations at the entrance of any area where workers are permitted to eat.
  • Be sure that all eating areas are thoroughly cleaned after each break and shift; this includes chairs, door handles, vending machines and payment devices. Further, tables should be cleaned after each use. If you provide a drinking water station, implement enhanced cleaning measures to keep the tap sanitised. Finally, require employees to put their rubbish in the bin straight away and not leave it for someone else to clean up.
  • Limit physical contact. Make sure you stagger break times to reduce congestion and physical contact in eating areas. Require workers to keep at least 2m from one another while eating.
  • Be cautious with catered food. If you have food catered for your employees, use extreme caution. Only allow pre-prepared and wrapped food to be catered. Do not use eating or drinking utensils from the caterer. When paying for food, use a contactless card as much as possible.

 

Welfare Facilities

Ensure you meet the following welfare facility standards at your worksite:

  • Toilet facilities. Restrict the number of employees permitted to use the toilet facilities at any one time. Require employees to wash their hands before and after using the toilet. Provide adequate rubbish bins for hand towels and conduct routine disposals. Be sure to utilise an enhanced cleaning regime for all toilet facilities—specifically focusing on door handles, locks and the toilet flush. Lastly, try to avoid using portable toilets on-site as much as possible.
  • Changing facilities, showers and drying rooms. Similar to toilet facility standards, be sure to restrict the number of employees using each facility at one time, ensure adequate rubbish bins and removal processes, and introduce enhanced cleaning procedures. In addition, stagger start and finish times for employees to further limit facility congestion and consider increasing the number of facilities available on-site to reduce physical contact between staff.

 

Travel to the Site

  • Whenever possible, encourage employees to travel alone to work, using their own personal means of transport. If employees typically use public transport to get to work, they should consider walking or cycling if the travel distance is feasible.
  • Be sure you have suitable arrangements on-site for parking cars and bicycles in a way that limits physical contact between staff. Also, provide handwashing facilities or hand sanitiser stations at all site entrances and exits. Lastly, make sure you consider how an employee who falls ill on-site would get taken home.

Furthermore, to ensure all construction sites are operating in a similar manner and following the Government’s guidelines on social distancing, the Construction Leadership Council has published Site Operating Procedures which are available here.

If your site has temporarily shut down, to ensure that the premises are protected over any period of dormancy and can be returned to service quickly, Aston Lark has produced a ‘dormancy checklist’ which you may find useful. The Construction dormancy checklist can be accessed here.

 

For additional COVID-19 resources, industry-specific guidance and insurance solutions, click here.

Aston Lark Insurance Brokers can be contacted on 0330 008 4956 or email sme@astonlark.com.